A
-
Abadan station
Investigation of Chlorine Gas Emission Hazards at ABFA Chlorination Plant at Abadan Station using Aloha and Marplot Software [Volume 6, Issue 1, 2023, Pages 11-17]
-
Accidents
Significance of Aviation Safety, Its Evaluation, and Ways to Strengthen Security [Volume 6, Issue 2, 2023, Pages 37-45]
-
Acoustic Emission Test
Acoustic Emission Characteristics Determination for Online Structural Monitoring of Fatigue Crack Growth inAluminium Alloy 2025 [Volume 5, Issue 1, 2022, Pages 37-42]
-
Actuator Failure
Application of a Model-Based Fault Detection Approach on a Spacecraft [Volume 3, Issue 2, 2020, Pages 19-26]
-
Aerodynamic heating
Thermal Sensitivity Analysis of a Telemetry Antenna in Sub-Orbital Spaceflights [Volume 4, Issue 2, 2021, Pages 13-19]
-
Aerospace Industry
A Comprehensive Review of Safety and Risk Management Strategies in Aerospace Operations for Human Casualty Mitigation [Volume 6, Issue 1, 2023, Pages 111-130]
-
AHP
A Combined AHP-PROMETHEE Approach for Intelligent Risk Prediction of Leak in a Storage Tank [Volume 3, Issue 2, 2020, Pages 55-61]
-
Air
Reducing Risk and Increasing Reliability and Safety of Compressed Air Systems by Detecting Patterns in Pressure Signals [Volume 3, Issue 2, 2020, Pages 81-89]
-
Aircraft
Significance of Aviation Safety, Its Evaluation, and Ways to Strengthen Security [Volume 6, Issue 2, 2023, Pages 37-45]
-
Air systems
Maintenance Grouping Optimization with Air Systems to Improve Risk Management [Volume 6, Issue 2, 2023, Pages 85-91]
-
Akaike Information Criterion
Direct Quantile Function Estimation Using Information Principles and Its Applications in Reliability Analysis [Volume 5, Issue 2, 2022, Pages 63-77]
-
Aluminum Alloy 2025
Acoustic Emission Characteristics Determination for Online Structural Monitoring of Fatigue Crack Growth inAluminium Alloy 2025 [Volume 5, Issue 1, 2022, Pages 37-42]
-
Aluminum Industry
Spherical Fuzzy Geometric Programming: A New Approach for System Reliability Assessment [Volume 6, Issue 1, 2023, Pages 47-53]
-
Anomaly Detection
Integrating Second Order Sliding Mode Control and Anomaly Detection Using Auto-Encoder for Enhanced Safety and Reliability of Quadrotor UAVs [Volume 5, Issue 2, 2022, Pages 107-116]
-
Archard Model
Prediction of Wear Failure in Journalpin Bearings [Volume 5, Issue 1, 2022, Pages 21-27]
-
Art2 Neural Network
Target Interception in Uncertain Environment Using ART2-Based Reinforcement Learning [Volume 6, Issue 2, 2023, Pages 93-105]
-
Artificial intelligence
Could the Bunce field Catastrophe Have Been Prevented Using an Intelligent Decision-Making System? [Volume 4, Issue 1, 2021, Pages 75-84]
-
Artificial intelligence
Implementation of AI for The Prediction of Failures of Reinforced Concrete Frames [Volume 5, Issue 2, 2022, Pages 1-7]
-
Artificial Neural Network
Detecting Unsafe Conditions of a Lathe using an Artificial Neural Network with Three-axis Acceleration Data [Volume 3, Issue 1, 2020, Pages 27-34]
-
Availability
Probabilistic Assessment of Two-Unit Parallel System with Correlated Lifetime under Inspection Using Regenerative Point Technique [Volume 2, Issue 1, 2019, Pages 5-14]
-
Availability
Stochastic Analysis of Complex System with Auto Changeover Switch and Advert Environment Employing Copula Approach [Volume 3, Issue 1, 2020, Pages 17-26]
-
Availability
Cost Benefit Analysis of a k-out-of-n: G Type Warm Standby Series System Under Catastrophic Failure Using Copula Linguistics [Volume 3, Issue 1, 2020, Pages 35-44]
-
Availability
Reliability Enhancement of Computer Network System with Server Replication [Volume 3, Issue 1, 2020, Pages 103-112]
-
Availability
Safety Risk Management in Production Process: A case study in the automotive supplier industry [Volume 3, Issue 1, 2020, Pages 85-95]
-
Availability
Performance Analysis of Complex Series Parallel Computer Network with Transparent Bridge Using Copula Distribution [Volume 4, Issue 1, 2021, Pages 47-59]
-
Availability
Markov Modeling and Reliability analysis of solar photovoltaic system Using Gumbel Hougaard Family Copula [Volume 4, Issue 2, 2021, Pages 47-58]
-
Availability
Reliability Modeling and Performance Evaluation of Sachet Water Production System Using Gumbel- Hougaard Family Copula [Volume 5, Issue 2, 2022, Pages 9-18]
-
Averaging Cell
Fault Tolerant Nanoscale Structures and Related Delay [Volume 3, Issue 1, 2020, Pages 55-59]
-
Aviation accidents
Prediction of Failure Time and Remaining Useful Life in Aviation Systems: Predictors, models, and challenges [Volume 4, Issue 2, 2021, Pages 97-106]
-
Aviation industry
Maintenance Grouping Optimization with Air Systems to Improve Risk Management [Volume 6, Issue 2, 2023, Pages 85-91]
-
Aviation Safety
Aviation Safety International Standards in the Framework of National Air Law [Volume 5, Issue 1, 2022, Pages 59-67]
B
-
Back Analysis
Determination of stochastic shear strength parameters of a real landslide by back analysis [Volume 4, Issue 1, 2021, Pages 7-16]
-
Bayes Analysis
Bayesian Inference of Reliability Growth-Oriented Weibull Distribution for Multiple Mechanical Stages Systems [Volume 3, Issue 1, 2020, Pages 77-84]
-
Bayesian
LSTM Encoder-Decoder Dropout Model in Software Reliability Prediction. [Volume 4, Issue 2, 2021, Pages 1-12]
-
Bayesian Modeling
Masked Data Analysis based on the Generalized Linear Model [Volume 3, Issue 2, 2020, Pages 1-7]
-
Bayesian network (BN)
Reliability assessment on natural gas pressure reduction stations using Monte Carlo simulation (MCS) [Volume 5, Issue 1, 2022, Pages 29-36]
-
Bayesian networks
Development of an Efficient Approach for Reliability Analysis Using the Comparative Study of Several Static and Dynamic Methods; Case Study of an Unmanned Aerial Vehicle [Volume 3, Issue 1, 2020, Pages 45-53]
-
Bayesian networks
Predictable Maintenance: A Bayesian Network-based Model [Volume 5, Issue 2, 2022, Pages 97-105]
-
Bayesian Theory
Optimal Sensors Positioning by Using Value of Information Method [Volume 6, Issue 1, 2023, Pages 87-96]
-
Bayesian updating
Probabilistic Physics of Failure (PPOF) Reliability Analysis of RF-MEMS Switches under Uncertainty [Volume 1, Issue 1, 2018, Pages 1-10]
-
Bearing
Identification of Size and Location of Bearing Damage via Deep Learning [Volume 4, Issue 1, 2021, Pages 69-74]
-
Bending Fatigue Test
Acoustic Emission Characteristics Determination for Online Structural Monitoring of Fatigue Crack Growth inAluminium Alloy 2025 [Volume 5, Issue 1, 2022, Pages 37-42]
-
Bernoulli vacation
Reliability and Sensitivity Analysis of a Batch Arrival Retrial Queue with k-Phase Services, Feedback, Vacation, Delay, Repair and Admission [Volume 3, Issue 2, 2020, Pages 27-40]
-
Big Data
Industry 4.0: Some Challenges and Opportunities for Reliability Engineering [Volume 2, Issue 1, 2019, Pages 23-34]
-
Big Data
Stress-Strength Weibull Analysis Applied to Estimate Reliability Index in Industry 4.0 [Volume 4, Issue 2, 2021, Pages 71-80]
-
Bivariate order statistics
A Study on the Multi-state (r, s)-out-of- n Systems with Dependent Components [Volume 1, Issue 1, 2018, Pages 11-16]
-
Blade displacement
In Situ Switch Blade Displacement Measurements in A Railway Turnout for Short-Term Monitoring Application [Volume 6, Issue 1, 2023, Pages 19-25]
-
Bow Tie method
Review and comparison of different risk assessment methods used for intelligent pigging operations in oil and gas pipelines with emphasis on the Bow Tie method [Volume 7, Issue 1, 2024, Pages 1-8]
-
Buncefield
Could the Bunce field Catastrophe Have Been Prevented Using an Intelligent Decision-Making System? [Volume 4, Issue 1, 2021, Pages 75-84]
-
Busy time
Probabilistic Assessment of Two-Unit Parallel System with Correlated Lifetime under Inspection Using Regenerative Point Technique [Volume 2, Issue 1, 2019, Pages 5-14]
C
-
C-130
Analysis of Factors Affecting the Safety of C-130 Guidance and Control [Volume 7, Issue 1, 2024, Pages 9-17]
-
Capacitor placement
Improving Reliability and Reducing Power Loss in Power Distribution Network by Determining Optimal Location and Size of Capacitor Banks [Volume 1, Issue 1, 2018, Pages 25-33]
-
CAREM-25
Neutronic and Safety Analysis of CAREM-25 Small Modular Reactor Using Supermc Advanced Code [Volume 6, Issue 2, 2023, Pages 107-113]
-
Catastrophes
Could the Bunce field Catastrophe Have Been Prevented Using an Intelligent Decision-Making System? [Volume 4, Issue 1, 2021, Pages 75-84]
-
Catastrophic failure
Cost Benefit Analysis of a k-out-of-n: G Type Warm Standby Series System Under Catastrophic Failure Using Copula Linguistics [Volume 3, Issue 1, 2020, Pages 35-44]
-
Catastrophic failure
Safety Risk Management in Production Process: A case study in the automotive supplier industry [Volume 3, Issue 1, 2020, Pages 85-95]
-
Cavitation Failure
Prediction of Cavitation Failure in Crankpin Bearings [Volume 4, Issue 2, 2021, Pages 21-27]
-
Challenges
Industry 4.0: Some Challenges and Opportunities for Reliability Engineering [Volume 2, Issue 1, 2019, Pages 23-34]
-
Classical fracture mechanics
A Reliable Fracture Mechanics [Volume 3, Issue 1, 2020, Pages 1-15]
-
Classical Torsional vibration
Sensitive Analysis of Tuned Mass on High Cycle Fatigue Safety Factor of Crankshaft [Volume 3, Issue 1, 2020, Pages 61-67]
-
Classical Torsional vibration
Parametric Study of Torsional Damper on Crankshaft Life Assessment of an IC Engine [Volume 3, Issue 2, 2020, Pages 41-50]
-
Clustering
Clustering of Condition-Based Maintenance Considering Perfect and Imperfect actions [Volume 3, Issue 1, 2020, Pages 69-76]
-
Cold standby
Life extension for a coherent system through cold standby and minimal repair policies for their independent components [Volume 3, Issue 2, 2020, Pages 51-54]
-
Complex systems
Improving Reliability of Complex Systems Using Analyses Obtained Through Design Structure Matrix and Interactive Failure Detection Procedures [Volume 4, Issue 1, 2021, Pages 39-45]
-
Composite Wing
Sensitivity Analysis of Flutter Velocity to Structural Properties of a Composite Wing [Volume 6, Issue 2, 2023, Pages 27-35]
-
Compressed
Reducing Risk and Increasing Reliability and Safety of Compressed Air Systems by Detecting Patterns in Pressure Signals [Volume 3, Issue 2, 2020, Pages 81-89]
-
Conditional estimation
The Conditional Estimation for related Weibull parameters Under Type-II Censoring [Volume 3, Issue 1, 2020, Pages 97-101]
-
Condition-based Maintenance
Clustering of Condition-Based Maintenance Considering Perfect and Imperfect actions [Volume 3, Issue 1, 2020, Pages 69-76]
-
Condition-based Maintenance
An overview of reinforcement learning and deep reinforcement learning for condition-based maintenance [Volume 4, Issue 2, 2021, Pages 81-89]
-
Condition Monitoring
Clustering of Condition-Based Maintenance Considering Perfect and Imperfect actions [Volume 3, Issue 1, 2020, Pages 69-76]
-
Condition Monitoring
In Situ Switch Blade Displacement Measurements in A Railway Turnout for Short-Term Monitoring Application [Volume 6, Issue 1, 2023, Pages 19-25]
-
Consecutive k-out-of-n:F system
Reliability Model of Fuzzy Consecutive k-out-of-n: F System [Volume 2, Issue 1, 2019, Pages 1-4]
-
Consequence Modeling
Evaluation of the Possible Hazards of an Ethanol Storage Tank [Volume 4, Issue 1, 2021, Pages 31-38]
-
Consumer Behavior
Charge Management of Energy Storage Devices Considering Battery Wear in IoT-based Distribution Networks [Volume 6, Issue 2, 2023, Pages 1-13]
-
Continuity of system output
Optimising System Continuity in Preventive Maintenance Schedules Based on Integrated Failure Mode and Spare Part Inventory Modelling [Volume 5, Issue 2, 2022, Pages 19-31]
-
Continuous Time Markov Chain (CTMC)
Analyzing Reliability of CGS Station by Continuous Time Markov Chains (CTMC) [Volume 4, Issue 2, 2021, Pages 91-96]
-
Continuum Damage Mechanics
A Continuum Damage Mechanics Approach for Reliability Analysis of Composite Laminates Containing a Central Circular Hole [Volume 4, Issue 1, 2021, Pages 23-30]
-
Conventional Three-Level Inverters
Reliability Assessment of Conventional Three-Level Inverters for Use in Hybrid Unmanned Aerial Vehicles [Volume 6, Issue 1, 2023, Pages 97-109]
-
Convergence rate
Step Direction Computation of the First-Order Reliability Analysis Based on Two-Step Root-Finding Methods [Volume 6, Issue 1, 2023, Pages 71-76]
-
Copulas
Copula-Based Approach to Reliability Analysis of Phased-Mission Systems [Volume 5, Issue 2, 2022, Pages 49-62]
-
Coronavirus
Use Piecewise Crow-AMSAA Method to Predict Infection and Death of Corona virus in Iran [Volume 3, Issue 2, 2020, Pages 71-80]
-
Corrosion Reliability Assessment
Corrosion Reliability Assessment of underground Water Transmission Pipelines by IHS Algorithm [Volume 1, Issue 1, 2018, Pages 45-51]
-
Cost analysis
Performance Analysis of Complex Series Parallel Computer Network with Transparent Bridge Using Copula Distribution [Volume 4, Issue 1, 2021, Pages 47-59]
-
Coulomb force
Fault Tolerant Guidance of Under-Actuated Satellite Formation Flying Using Inter-Vehicle Coulomb Force [Volume 2, Issue 1, 2019, Pages 43-52]
-
Cournot Game, Load point Reliability
Reliability Improvement in Distribution Systems Via Game Theory [Volume 5, Issue 1, 2022, Pages 93-99]
-
COVID-19
COVID-19 Infection Risk Index Estimation in Flight Destinations (case study: Kish Air destinations) [Volume 3, Issue 2, 2020, Pages 63-70]
-
Crankpin Bearing
Prediction of Cavitation Failure in Crankpin Bearings [Volume 4, Issue 2, 2021, Pages 21-27]
-
Crankshaft life
Parametric Study of Torsional Damper on Crankshaft Life Assessment of an IC Engine [Volume 3, Issue 2, 2020, Pages 41-50]
-
Crankshaft life
Sensitive Analysis of Tuned Mass on High Cycle Fatigue Safety Factor of Crankshaft [Volume 3, Issue 1, 2020, Pages 61-67]
-
Cranktrain
Sensitive Analysis of Tuned Mass on High Cycle Fatigue Safety Factor of Crankshaft [Volume 3, Issue 1, 2020, Pages 61-67]
-
Cranktrain
Parametric Study of Torsional Damper on Crankshaft Life Assessment of an IC Engine [Volume 3, Issue 2, 2020, Pages 41-50]
-
Creep life prediction
Probabilistic Life Assessment of Gas Turbine Blade Alloys under Creep [Volume 3, Issue 2, 2020, Pages 9-17]
-
Culture and Awareness
Analysis of “Evaluation of Cybersecurity Culture and Awareness Scale (ECSCAS)” based on Polychotomous models of Item Response Theory (IRT) [Volume 6, Issue 2, 2023, Pages 47-53]
-
Cumulative residual entropy
Nonparametric Estimation of the Family of Risk Measures Based on Progressive Type II Censored Data [Volume 5, Issue 1, 2022, Pages 69-75]
-
Cyber
Origins of Cyber Security: Short Report [Volume 6, Issue 2, 2023, Pages 77-83]
-
Cyberattacks
Awareness and Social Engineering-Based Cyberattacks [Volume 7, Issue 1, 2024]
-
Cybersecurity
Analysis of “Evaluation of Cybersecurity Culture and Awareness Scale (ECSCAS)” based on Polychotomous models of Item Response Theory (IRT) [Volume 6, Issue 2, 2023, Pages 47-53]
-
Cyber Security
Ranking of Factors Affecting Cyber Security [Volume 6, Issue 1, 2023, Pages 63-69]
-
Cyber Security
Meta-Analysis of the Research Conducted in the Field of Cyber Security with an Emphasis on the Human Circle [Volume 6, Issue 2, 2023, Pages 21-26]
D
-
Danger zone
Investigation of Chlorine Gas Emission Hazards at ABFA Chlorination Plant at Abadan Station using Aloha and Marplot Software [Volume 6, Issue 1, 2023, Pages 11-17]
-
Deaths
Use Piecewise Crow-AMSAA Method to Predict Infection and Death of Corona virus in Iran [Volume 3, Issue 2, 2020, Pages 71-80]
-
Decision Making
A Combined AHP-PROMETHEE Approach for Intelligent Risk Prediction of Leak in a Storage Tank [Volume 3, Issue 2, 2020, Pages 55-61]
-
Decision Making
Could the Bunce field Catastrophe Have Been Prevented Using an Intelligent Decision-Making System? [Volume 4, Issue 1, 2021, Pages 75-84]
-
Decision Making
Optimal Sensors Positioning by Using Value of Information Method [Volume 6, Issue 1, 2023, Pages 87-96]
-
Deep Learning
Identification of Size and Location of Bearing Damage via Deep Learning [Volume 4, Issue 1, 2021, Pages 69-74]
-
Deep reinforcement learning
An overview of reinforcement learning and deep reinforcement learning for condition-based maintenance [Volume 4, Issue 2, 2021, Pages 81-89]
-
Degradation modeling
Remaining Useful Life Prediction for a Multi-Component System with Degradation Interactions [Volume 6, Issue 1, 2023, Pages 27-45]
-
Detonation failure
The Effect of Momentum Loss on Detonation Failure at Very Low Activation Energy [Volume 4, Issue 2, 2021, Pages 39-46]
-
Detonation stability
The Effect of Momentum Loss on Detonation Failure at Very Low Activation Energy [Volume 4, Issue 2, 2021, Pages 39-46]
-
Dielectric charging
Probabilistic Physics of Failure (PPOF) Reliability Analysis of RF-MEMS Switches under Uncertainty [Volume 1, Issue 1, 2018, Pages 1-10]
-
Discrete-time
Analysis of Discrete Fix Up Limit Time of Two Systems Prediction [Volume 5, Issue 1, 2022, Pages 1-8]
-
Distribution
Reliability evaluation of an industrial system using Lomax-Lindley distribution [(Articles in Press)]
-
Distribution network
Optimization of Electrical Distribution System Maintenance Process Based on Failure Modes [Volume 2, Issue 1, 2019, Pages 35-42]
-
Distribution system
Reliability Improvement in Distribution Systems Via Game Theory [Volume 5, Issue 1, 2022, Pages 93-99]
-
DSM
Improving Reliability of Complex Systems Using Analyses Obtained Through Design Structure Matrix and Interactive Failure Detection Procedures [Volume 4, Issue 1, 2021, Pages 39-45]
-
Dynamic analysis
Dynamic Reliability Analysis of Moment Resisting Concrete Frames [Volume 4, Issue 1, 2021, Pages 17-22]
-
Dynamic Fault Tree
Development of an Efficient Approach for Reliability Analysis Using the Comparative Study of Several Static and Dynamic Methods; Case Study of an Unmanned Aerial Vehicle [Volume 3, Issue 1, 2020, Pages 45-53]
E
-
Economy
Performance Analysis of K out of N Reverse Osmosis (RO) system in the treatment of wastewater using RAMD analysis [Volume 4, Issue 1, 2021, Pages 85-93]
-
Efficiency
Markov Modeling and Reliability analysis of solar photovoltaic system Using Gumbel Hougaard Family Copula [Volume 4, Issue 2, 2021, Pages 47-58]
-
Elasto-Hydrodynamic Lubrication
Prediction of Cavitation Failure in Crankpin Bearings [Volume 4, Issue 2, 2021, Pages 21-27]
-
Elasto-Hydrodynamic Model
Prediction of Wear Failure in Journalpin Bearings [Volume 5, Issue 1, 2022, Pages 21-27]
-
Electromagnetic simulation
Thermal Sensitivity Analysis of a Telemetry Antenna in Sub-Orbital Spaceflights [Volume 4, Issue 2, 2021, Pages 13-19]
-
EMMAE Method
Application of a Model-Based Fault Detection Approach on a Spacecraft [Volume 3, Issue 2, 2020, Pages 19-26]
-
Energy management
Charge Management of Energy Storage Devices Considering Battery Wear in IoT-based Distribution Networks [Volume 6, Issue 2, 2023, Pages 1-13]
-
Engine
Significance of Aviation Safety, Its Evaluation, and Ways to Strengthen Security [Volume 6, Issue 2, 2023, Pages 37-45]
-
Environment failure
Stochastic Analysis of Complex System with Auto Changeover Switch and Advert Environment Employing Copula Approach [Volume 3, Issue 1, 2020, Pages 17-26]
-
Ethanol Storage Tank
Evaluation of the Possible Hazards of an Ethanol Storage Tank [Volume 4, Issue 1, 2021, Pages 31-38]
F
-
Failure
On Possibility of Extending the Optimal Replacement time of Series and Parallel Systems [Volume 4, Issue 2, 2021, Pages 29-37]
-
Failure mechanism
Probabilistic Life Assessment of Gas Turbine Blade Alloys under Creep [Volume 3, Issue 2, 2020, Pages 9-17]
-
Failure mode
Failure Mode and Effects Analysis on the Hydraulic System of Aircraft Ilyushin-76 [Volume 5, Issue 1, 2022, Pages 49-58]
-
Failure modes and effects analysis (FMEA)
Optimising System Continuity in Preventive Maintenance Schedules Based on Integrated Failure Mode and Spare Part Inventory Modelling [Volume 5, Issue 2, 2022, Pages 19-31]
-
Failure probability
Corrosion Reliability Assessment of underground Water Transmission Pipelines by IHS Algorithm [Volume 1, Issue 1, 2018, Pages 45-51]
-
Failure probability
Analyzing Reliability of CGS Station by Continuous Time Markov Chains (CTMC) [Volume 4, Issue 2, 2021, Pages 91-96]
-
Fault-tolerance
Fault Tolerant Nanoscale Structures and Related Delay [Volume 3, Issue 1, 2020, Pages 55-59]
-
Fault Tolerant
Fault-tolerant Sliding Mode Controller and Active Vibration Control Design for Attitude Stabilization of a Flexible Spacecraft in the Presence of Bounded Disturbances [Volume 5, Issue 1, 2022, Pages 85-91]
-
Fiber/Matrix Debonding
A Continuum Damage Mechanics Approach for Reliability Analysis of Composite Laminates Containing a Central Circular Hole [Volume 4, Issue 1, 2021, Pages 23-30]
-
Figures
Performance Analysis of K out of N Reverse Osmosis (RO) system in the treatment of wastewater using RAMD analysis [Volume 4, Issue 1, 2021, Pages 85-93]
-
Filter
Reliability Modeling and Performance Evaluation of Sachet Water Production System Using Gumbel- Hougaard Family Copula [Volume 5, Issue 2, 2022, Pages 9-18]
-
Finite element method
Determination of stochastic shear strength parameters of a real landslide by back analysis [Volume 4, Issue 1, 2021, Pages 7-16]
-
Fire
Evaluation of the Possible Hazards of an Ethanol Storage Tank [Volume 4, Issue 1, 2021, Pages 31-38]
-
Fire Safety
Safety assessment of people in public building fire incidents using harmony search algorithm [Volume 5, Issue 2, 2022, Pages 33-40]
-
First-Order Reliability Method
A Continuum Damage Mechanics Approach for Reliability Analysis of Composite Laminates Containing a Central Circular Hole [Volume 4, Issue 1, 2021, Pages 23-30]
-
Fix up
Analysis of Discrete Fix Up Limit Time of Two Systems Prediction [Volume 5, Issue 1, 2022, Pages 1-8]
-
Flight safety risks
Significance of Aviation Safety, Its Evaluation, and Ways to Strengthen Security [Volume 6, Issue 2, 2023, Pages 37-45]
-
Flutter Velocity Sensitivity Analysis
Sensitivity Analysis of Flutter Velocity to Structural Properties of a Composite Wing [Volume 6, Issue 2, 2023, Pages 27-35]
-
FMEA
Reliability Evaluation of Systems Related to PC-7 Aircrew Using FMEA Method [Volume 6, Issue 2, 2023, Pages 65-75]
-
Frequency
Performance Analysis of K out of N Reverse Osmosis (RO) system in the treatment of wastewater using RAMD analysis [Volume 4, Issue 1, 2021, Pages 85-93]
-
Full Natural Operating Reactors
Investigation of the Natural Circulation FlowMap in NuScale Small Modular Reactor [Volume 4, Issue 1, 2021, Pages 95-100]
-
Fuzzy approach
Improving Accuracy in Importance Sampling: An Integrated Approach with Fuzzy-Strata Sampling [Volume 4, Issue 1, 2021, Pages 61-67]
-
Fuzzy Parameters
Reliability Model of Fuzzy Consecutive k-out-of-n: F System [Volume 2, Issue 1, 2019, Pages 1-4]
-
Fuzzy-Strata
Improving Accuracy in Importance Sampling: An Integrated Approach with Fuzzy-Strata Sampling [Volume 4, Issue 1, 2021, Pages 61-67]
-
Fuzzy VIKOR
Software Safety Analysis with UML-Based SRBD and Fuzzy VIKOR- Based FMEA [Volume 1, Issue 1, 2018, Pages 35-44]
G
-
Gas Turbine Blade
Probabilistic Life Assessment of Gas Turbine Blade Alloys under Creep [Volume 3, Issue 2, 2020, Pages 9-17]
-
Geometric programming
Spherical Fuzzy Geometric Programming: A New Approach for System Reliability Assessment [Volume 6, Issue 1, 2023, Pages 47-53]
-
Gini mean difference
Nonparametric Estimation of the Family of Risk Measures Based on Progressive Type II Censored Data [Volume 5, Issue 1, 2022, Pages 69-75]
-
Graphical Evaluation Review Technique (GERT)
Determination of Optimum Sample Size for Lot Acceptance Attribute Sampling under Life Tests Based On Rayleigh Distribution Using Graphical Evaluation Review Technique (GERT) [Volume 3, Issue 2, 2020, Pages 91-98]
-
Group Search Optimization
Optimization of Electrical Distribution System Maintenance Process Based on Failure Modes [Volume 2, Issue 1, 2019, Pages 35-42]
-
G system
Safety Risk Management in Production Process: A case study in the automotive supplier industry [Volume 3, Issue 1, 2020, Pages 85-95]
-
Guidance and control
Analysis of Factors Affecting the Safety of C-130 Guidance and Control [Volume 7, Issue 1, 2024, Pages 9-17]
-
Guidance law
Fault Tolerant Guidance of Under-Actuated Satellite Formation Flying Using Inter-Vehicle Coulomb Force [Volume 2, Issue 1, 2019, Pages 43-52]
-
Gumbel distribution
The Conditional Estimation for related Weibull parameters Under Type-II Censoring [Volume 3, Issue 1, 2020, Pages 97-101]
-
Gumbel-Hougaard family
Performance Analysis of Complex Series Parallel Computer Network with Transparent Bridge Using Copula Distribution [Volume 4, Issue 1, 2021, Pages 47-59]
-
Gumbel-Hougaard family copula
Stochastic Analysis of Complex System with Auto Changeover Switch and Advert Environment Employing Copula Approach [Volume 3, Issue 1, 2020, Pages 17-26]
-
Gumbel-Hougaard family copula distribution
Cost Benefit Analysis of a k-out-of-n: G Type Warm Standby Series System Under Catastrophic Failure Using Copula Linguistics [Volume 3, Issue 1, 2020, Pages 35-44]
-
Gumbel-Hougaard family copula distribution
Safety Risk Management in Production Process: A case study in the automotive supplier industry [Volume 3, Issue 1, 2020, Pages 85-95]
H
-
H2S gas wells
Introduction of Risk Management Method Based on Hierarchy Risk Management and Surface Data to Eliminate Operational Risk (Second Development) [Volume 6, Issue 2, 2023, Pages 15-20]
-
Harmony Algorithm
Safety assessment of people in public building fire incidents using harmony search algorithm [Volume 5, Issue 2, 2022, Pages 33-40]
-
Harmony Search Optimization Algorithm
Corrosion Reliability Assessment of underground Water Transmission Pipelines by IHS Algorithm [Volume 1, Issue 1, 2018, Pages 45-51]
-
Health management
Industry 4.0: Some Challenges and Opportunities for Reliability Engineering [Volume 2, Issue 1, 2019, Pages 23-34]
-
High Cycle Fatigue
Sensitive Analysis of Tuned Mass on High Cycle Fatigue Safety Factor of Crankshaft [Volume 3, Issue 1, 2020, Pages 61-67]
-
High Cycle Fatigue
Parametric Study of Torsional Damper on Crankshaft Life Assessment of an IC Engine [Volume 3, Issue 2, 2020, Pages 41-50]
-
High-Tech Products
Identifying & Ranking the Key Factors Affecting the Quality Assurance (QA) of High-Tech Products in Turbine Engineering and Manufacturing Companies [Volume 5, Issue 2, 2022, Pages 79-87]
-
Honey-Bees Mating Optimization
Improving Reliability and Reducing Power Loss in Power Distribution Network by Determining Optimal Location and Size of Capacitor Banks [Volume 1, Issue 1, 2018, Pages 25-33]
-
Human circle
Meta-Analysis of the Research Conducted in the Field of Cyber Security with an Emphasis on the Human Circle [Volume 6, Issue 2, 2023, Pages 21-26]
-
Human failure
Stochastic Analysis of Complex System with Auto Changeover Switch and Advert Environment Employing Copula Approach [Volume 3, Issue 1, 2020, Pages 17-26]
-
Human-machine interaction
Industry 4.0: Some Challenges and Opportunities for Reliability Engineering [Volume 2, Issue 1, 2019, Pages 23-34]
-
Humidity
Probabilistic Life Assessment of Gas Turbine Blade Alloys under Creep [Volume 3, Issue 2, 2020, Pages 9-17]
-
Hybrid Drone
Reliability Assessment of Conventional Three-Level Inverters for Use in Hybrid Unmanned Aerial Vehicles [Volume 6, Issue 1, 2023, Pages 97-109]
-
Hydraulic system
Failure Mode and Effects Analysis on the Hydraulic System of Aircraft Ilyushin-76 [Volume 5, Issue 1, 2022, Pages 49-58]
I
-
IC engine
Prediction of Cavitation Failure in Crankpin Bearings [Volume 4, Issue 2, 2021, Pages 21-27]
-
Ilyushin
Failure Mode and Effects Analysis on the Hydraulic System of Aircraft Ilyushin-76 [Volume 5, Issue 1, 2022, Pages 49-58]
-
Imperfect maintenance
Clustering of Condition-Based Maintenance Considering Perfect and Imperfect actions [Volume 3, Issue 1, 2020, Pages 69-76]
-
Importance Measures
Computation of Importance Measures Using Bayesian Networks for the Reliability and Safety of Complex Systems [Volume 3, Issue 2, 2020, Pages 99-111]
-
Incremental dynamic analysis (IDA)
Reliability of Iranian Existing Residential Reinforced Concrete Structures in Seismic Events [Volume 6, Issue 2, 2023, Pages 55-64]
-
Industrial system
Reliability evaluation of an industrial system using Lomax-Lindley distribution [(Articles in Press)]
-
Industry 4.0
Industry 4.0: Some Challenges and Opportunities for Reliability Engineering [Volume 2, Issue 1, 2019, Pages 23-34]
-
Infected cases
Use Piecewise Crow-AMSAA Method to Predict Infection and Death of Corona virus in Iran [Volume 3, Issue 2, 2020, Pages 71-80]
-
Infection Risk index
COVID-19 Infection Risk Index Estimation in Flight Destinations (case study: Kish Air destinations) [Volume 3, Issue 2, 2020, Pages 63-70]
-
Integral Small Modular Reactors
Investigation of the Natural Circulation FlowMap in NuScale Small Modular Reactor [Volume 4, Issue 1, 2021, Pages 95-100]
-
Intelligent
Reducing Risk and Increasing Reliability and Safety of Compressed Air Systems by Detecting Patterns in Pressure Signals [Volume 3, Issue 2, 2020, Pages 81-89]
-
Interactive Failure
Improving Reliability of Complex Systems Using Analyses Obtained Through Design Structure Matrix and Interactive Failure Detection Procedures [Volume 4, Issue 1, 2021, Pages 39-45]
-
International Law
Aviation Safety International Standards in the Framework of National Air Law [Volume 5, Issue 1, 2022, Pages 59-67]
-
Internet of Things
Charge Management of Energy Storage Devices Considering Battery Wear in IoT-based Distribution Networks [Volume 6, Issue 2, 2023, Pages 1-13]
-
Inverted-F antenna
Thermal Sensitivity Analysis of a Telemetry Antenna in Sub-Orbital Spaceflights [Volume 4, Issue 2, 2021, Pages 13-19]
-
Item-response theory
Analysis of “Evaluation of Cybersecurity Culture and Awareness Scale (ECSCAS)” based on Polychotomous models of Item Response Theory (IRT) [Volume 6, Issue 2, 2023, Pages 47-53]
J
-
Jajarm Bauxite
Assessment of Spare Parts Requirement by Reliability: A Case Study [Volume 5, Issue 1, 2022, Pages 9-19]
-
Jones aerodynamic model
Sensitivity Analysis of Flutter Velocity to Structural Properties of a Composite Wing [Volume 6, Issue 2, 2023, Pages 27-35]
-
Journalpin Bearing
Prediction of Wear Failure in Journalpin Bearings [Volume 5, Issue 1, 2022, Pages 21-27]
K
-
K-out-of-n
Safety Risk Management in Production Process: A case study in the automotive supplier industry [Volume 3, Issue 1, 2020, Pages 85-95]
L
-
Landslide
Determination of stochastic shear strength parameters of a real landslide by back analysis [Volume 4, Issue 1, 2021, Pages 7-16]
-
Lathe
Detecting Unsafe Conditions of a Lathe using an Artificial Neural Network with Three-axis Acceleration Data [Volume 3, Issue 1, 2020, Pages 27-34]
-
Level
On Possibility of Extending the Optimal Replacement time of Series and Parallel Systems [Volume 4, Issue 2, 2021, Pages 29-37]
-
Life Time Distribution Model
Determination of Optimum Sample Size for Lot Acceptance Attribute Sampling under Life Tests Based On Rayleigh Distribution Using Graphical Evaluation Review Technique (GERT) [Volume 3, Issue 2, 2020, Pages 91-98]
-
Limit policy
Analysis of Discrete Fix Up Limit Time of Two Systems Prediction [Volume 5, Issue 1, 2022, Pages 1-8]
-
Limit time
Analysis of Discrete Fix Up Limit Time of Two Systems Prediction [Volume 5, Issue 1, 2022, Pages 1-8]
-
Lindley
Reliability evaluation of an industrial system using Lomax-Lindley distribution [(Articles in Press)]
-
Lindley’ s approximation
m-Component Reliability Model in Bayesian Inference on Modified Weibull Distribution [Volume 7, Issue 1, 2024, Pages 19-29]
-
Linear system
Reliability Model of Fuzzy Consecutive k-out-of-n: F System [Volume 2, Issue 1, 2019, Pages 1-4]
-
Lomax
Reliability evaluation of an industrial system using Lomax-Lindley distribution [(Articles in Press)]
-
Lorestan distribution network
Improving Reliability from View of Buyer-Seller by Optimal Reconfiguration: Applicability to Lorestan Distribution Network [Volume 4, Issue 1, 2021, Pages 1-6]
-
Loss of actuator effectiveness
Fault-tolerant Sliding Mode Controller and Active Vibration Control Design for Attitude Stabilization of a Flexible Spacecraft in the Presence of Bounded Disturbances [Volume 5, Issue 1, 2022, Pages 85-91]
-
LSTM
LSTM Encoder-Decoder Dropout Model in Software Reliability Prediction. [Volume 4, Issue 2, 2021, Pages 1-12]
-
LSTM Encoder-Decoder
LSTM Encoder-Decoder Dropout Model in Software Reliability Prediction. [Volume 4, Issue 2, 2021, Pages 1-12]
M
-
Machine Learning
Prediction of Failure Time and Remaining Useful Life in Aviation Systems: Predictors, models, and challenges [Volume 4, Issue 2, 2021, Pages 97-106]
-
Machine Learning
Integrating Second Order Sliding Mode Control and Anomaly Detection Using Auto-Encoder for Enhanced Safety and Reliability of Quadrotor UAVs [Volume 5, Issue 2, 2022, Pages 107-116]
-
Maintenance Decision
Moving from One Site to Multi-Site Vulnerability Studies: Decision Analysis for Trade-off Between Risks and Benefits [Volume 2, Issue 1, 2019, Pages 15-21]
-
MAPNA group
A Risk Assessment Model for Exploitation of New Technologies [Volume 5, Issue 2, 2022, Pages 117-126]
-
Markov
Combined Markov and UGF Methods for Multi-State Repairable Phased Mission Systems [Volume 6, Issue 1, 2023, Pages 1-9]
-
Markov chain Monte Carlo Method
Masked Data Analysis based on the Generalized Linear Model [Volume 3, Issue 2, 2020, Pages 1-7]
-
Markov decision process
An overview of reinforcement learning and deep reinforcement learning for condition-based maintenance [Volume 4, Issue 2, 2021, Pages 81-89]
-
Markov decision process
Optimal Preventive Maintenance Policy for Non-Identical Components: Traditional Renewal Theory vs Modern Reinforcement Learning [Volume 6, Issue 1, 2023, Pages 77-85]
-
Markov model
Optimization of Electrical Distribution System Maintenance Process Based on Failure Modes [Volume 2, Issue 1, 2019, Pages 35-42]
-
Masked Data
Masked Data Analysis based on the Generalized Linear Model [Volume 3, Issue 2, 2020, Pages 1-7]
-
Matrix Cracking
A Continuum Damage Mechanics Approach for Reliability Analysis of Composite Laminates Containing a Central Circular Hole [Volume 4, Issue 1, 2021, Pages 23-30]
-
MCMC method
m-Component Reliability Model in Bayesian Inference on Modified Weibull Distribution [Volume 7, Issue 1, 2024, Pages 19-29]
-
MCNPX
Neutronic and Safety Analysis of CAREM-25 Small Modular Reactor Using Supermc Advanced Code [Volume 6, Issue 2, 2023, Pages 107-113]
-
Mean residual lifetime
A Study on the Multi-state (r, s)-out-of- n Systems with Dependent Components [Volume 1, Issue 1, 2018, Pages 11-16]
-
Mean time to failure
Reliability Enhancement of Computer Network System with Server Replication [Volume 3, Issue 1, 2020, Pages 103-112]
-
Mean Time to Failure (MTTF)
Performance Analysis of Complex Series Parallel Computer Network with Transparent Bridge Using Copula Distribution [Volume 4, Issue 1, 2021, Pages 47-59]
-
Meta-analysis
Meta-Analysis of the Research Conducted in the Field of Cyber Security with an Emphasis on the Human Circle [Volume 6, Issue 2, 2023, Pages 21-26]
-
Mixed Proportional Hazard
Mechanical Equipment Reliability Analysis: Case Study [Volume 4, Issue 2, 2021, Pages 59-70]
-
MLI Inverters
Reliability Assessment of Conventional Three-Level Inverters for Use in Hybrid Unmanned Aerial Vehicles [Volume 6, Issue 1, 2023, Pages 97-109]
-
Modified Bat algorithm
Optimal Multi-Level Redundancy Allocation Using a New Modified Bat Algorithm [Volume 5, Issue 2, 2022, Pages 41-48]
-
Moment Resistant Frame
Dynamic Reliability Analysis of Moment Resisting Concrete Frames [Volume 4, Issue 1, 2021, Pages 17-22]
-
Monte Carlo
Bayesian Inference of Reliability Growth-Oriented Weibull Distribution for Multiple Mechanical Stages Systems [Volume 3, Issue 1, 2020, Pages 77-84]
-
Monte Carlo
Optimal Preventive Maintenance Policy for Non-Identical Components: Traditional Renewal Theory vs Modern Reinforcement Learning [Volume 6, Issue 1, 2023, Pages 77-85]
-
Monte Carlo simulation
Probability assessment of photoneutron production of Varian-Clinac ix linear accelerator using Monte Carlo simulation [Volume 7, Issue 1, 2024, Pages 37-44]
-
Monte Carlo Simulation (MCS)
Reliability assessment on natural gas pressure reduction stations using Monte Carlo simulation (MCS) [Volume 5, Issue 1, 2022, Pages 29-36]
-
MTSF
Probabilistic Assessment of Two-Unit Parallel System with Correlated Lifetime under Inspection Using Regenerative Point Technique [Volume 2, Issue 1, 2019, Pages 5-14]
-
MTTF
Stochastic Analysis of Complex System with Auto Changeover Switch and Advert Environment Employing Copula Approach [Volume 3, Issue 1, 2020, Pages 17-26]
-
MTTF
Cost Benefit Analysis of a k-out-of-n: G Type Warm Standby Series System Under Catastrophic Failure Using Copula Linguistics [Volume 3, Issue 1, 2020, Pages 35-44]
-
MTTF
Safety Risk Management in Production Process: A case study in the automotive supplier industry [Volume 3, Issue 1, 2020, Pages 85-95]
-
Multi-component stress-strength reliability
m-Component Reliability Model in Bayesian Inference on Modified Weibull Distribution [Volume 7, Issue 1, 2024, Pages 19-29]
-
Multi-criteria analysis
A Combined AHP-PROMETHEE Approach for Intelligent Risk Prediction of Leak in a Storage Tank [Volume 3, Issue 2, 2020, Pages 55-61]
-
Multi-level systems
Optimal Multi-Level Redundancy Allocation Using a New Modified Bat Algorithm [Volume 5, Issue 2, 2022, Pages 41-48]
-
Multi-state (r, s)-out-of-n system
A Study on the Multi-state (r, s)-out-of- n Systems with Dependent Components [Volume 1, Issue 1, 2018, Pages 11-16]
-
Multi-state systems
Combined Markov and UGF Methods for Multi-State Repairable Phased Mission Systems [Volume 6, Issue 1, 2023, Pages 1-9]
N
-
NAND Multiplexing
Fault Tolerant Nanoscale Structures and Related Delay [Volume 3, Issue 1, 2020, Pages 55-59]
-
NARX, RNN
LSTM Encoder-Decoder Dropout Model in Software Reliability Prediction. [Volume 4, Issue 2, 2021, Pages 1-12]
-
Natural Circulation Performance (NCP)
Investigation of the Natural Circulation FlowMap in NuScale Small Modular Reactor [Volume 4, Issue 1, 2021, Pages 95-100]
-
Neuro-fuzzy system
A Novel Method for Software Reliability Assessment via Neuro-Fuzzy System [Volume 5, Issue 1, 2022, Pages 43-48]
-
Neutron
Probability assessment of photoneutron production of Varian-Clinac ix linear accelerator using Monte Carlo simulation [Volume 7, Issue 1, 2024, Pages 37-44]
-
Neutronic
Neutronic and Safety Analysis of CAREM-25 Small Modular Reactor Using Supermc Advanced Code [Volume 6, Issue 2, 2023, Pages 107-113]
-
Nimonic 90
Probabilistic Life Assessment of Gas Turbine Blade Alloys under Creep [Volume 3, Issue 2, 2020, Pages 9-17]
-
Non-homogeneous Poisson process (NHPP)
Bayesian Inference of Reliability Growth-Oriented Weibull Distribution for Multiple Mechanical Stages Systems [Volume 3, Issue 1, 2020, Pages 77-84]
-
Non-homogeneous Poisson process (NHPP)
Use Piecewise Crow-AMSAA Method to Predict Infection and Death of Corona virus in Iran [Volume 3, Issue 2, 2020, Pages 71-80]
-
Non-Ideal detonation
The Effect of Momentum Loss on Detonation Failure at Very Low Activation Energy [Volume 4, Issue 2, 2021, Pages 39-46]
-
Non-ignorable Missing Mechanism
Masked Data Analysis based on the Generalized Linear Model [Volume 3, Issue 2, 2020, Pages 1-7]
-
Nonlinear dynamic analysis
A Reliable Method for Determining the Tapered Minimum Magnitude in a Probabilistic Seismic Hazard Analysis [Volume 5, Issue 2, 2022, Pages 89-95]
-
Nonlinear limit state function
Step Direction Computation of the First-Order Reliability Analysis Based on Two-Step Root-Finding Methods [Volume 6, Issue 1, 2023, Pages 71-76]
-
Non parametric estimation
Nonparametric Estimation of the Family of Risk Measures Based on Progressive Type II Censored Data [Volume 5, Issue 1, 2022, Pages 69-75]
O
-
Observed Covariate
Mechanical Equipment Reliability Analysis: Case Study [Volume 4, Issue 2, 2021, Pages 59-70]
-
Onboard Computer
Triple-Triple Redundant Reliable Onboard Computer Based on Multicore Microcontrollers [Volume 1, Issue 1, 2018, Pages 17-24]
-
Operational risk
Introduction of Risk Management Method Based on Hierarchy Risk Management and Surface Data to Eliminate Operational Risk (Second Development) [Volume 6, Issue 2, 2023, Pages 15-20]
-
Opportunistic maintenance
Optimal Preventive Maintenance Policy for Non-Identical Components: Traditional Renewal Theory vs Modern Reinforcement Learning [Volume 6, Issue 1, 2023, Pages 77-85]
-
Overhaul
Analysis of Factors Affecting the Safety of C-130 Guidance and Control [Volume 7, Issue 1, 2024, Pages 9-17]
P
-
Pair wise comparison
COVID-19 Infection Risk Index Estimation in Flight Destinations (case study: Kish Air destinations) [Volume 3, Issue 2, 2020, Pages 63-70]
-
Parallel Machine
A Mixed Integer Model for Unrelated Parallel Machine Scheduling with Job Deteriorating Effect [Volume 5, Issue 1, 2022, Pages 77-84]
-
Parameters
Reliability Evaluation of Reverse Osmosis System in Water Treatment Using Modified Weibull Distribution [Volume 6, Issue 1, 2023, Pages 55-61]
-
Partially Failure Modes
Optimising System Continuity in Preventive Maintenance Schedules Based on Integrated Failure Mode and Spare Part Inventory Modelling [Volume 5, Issue 2, 2022, Pages 19-31]
-
Particle Swarm Optimization Algorithm
Improving Reliability from View of Buyer-Seller by Optimal Reconfiguration: Applicability to Lorestan Distribution Network [Volume 4, Issue 1, 2021, Pages 1-6]
-
PC-7
Reliability Evaluation of Systems Related to PC-7 Aircrew Using FMEA Method [Volume 6, Issue 2, 2023, Pages 65-75]
-
Peak Ground Acceleration
Implementation of AI for The Prediction of Failures of Reinforced Concrete Frames [Volume 5, Issue 2, 2022, Pages 1-7]
-
Performance Measures
Reliability and Sensitivity Analysis of a Batch Arrival Retrial Queue with k-Phase Services, Feedback, Vacation, Delay, Repair and Admission [Volume 3, Issue 2, 2020, Pages 27-40]
-
Persian Curves
A Reliable Fracture Mechanics [Volume 3, Issue 1, 2020, Pages 1-15]
-
Phased mission
Combined Markov and UGF Methods for Multi-State Repairable Phased Mission Systems [Volume 6, Issue 1, 2023, Pages 1-9]
-
PHAST
Evaluation of the Possible Hazards of an Ethanol Storage Tank [Volume 4, Issue 1, 2021, Pages 31-38]
-
Photovoltaic
Markov Modeling and Reliability analysis of solar photovoltaic system Using Gumbel Hougaard Family Copula [Volume 4, Issue 2, 2021, Pages 47-58]
-
Piecewise Crow-AMSAA (NHPP)
Use Piecewise Crow-AMSAA Method to Predict Infection and Death of Corona virus in Iran [Volume 3, Issue 2, 2020, Pages 71-80]
-
Piezoelectric
Fault-tolerant Sliding Mode Controller and Active Vibration Control Design for Attitude Stabilization of a Flexible Spacecraft in the Presence of Bounded Disturbances [Volume 5, Issue 1, 2022, Pages 85-91]
-
Pipeline
Analyzing Reliability of CGS Station by Continuous Time Markov Chains (CTMC) [Volume 4, Issue 2, 2021, Pages 91-96]
-
Pipeline
Reliability assessment on natural gas pressure reduction stations using Monte Carlo simulation (MCS) [Volume 5, Issue 1, 2022, Pages 29-36]
-
Plastic hinge
Implementation of AI for The Prediction of Failures of Reinforced Concrete Frames [Volume 5, Issue 2, 2022, Pages 1-7]
-
Polychotomous models
Analysis of “Evaluation of Cybersecurity Culture and Awareness Scale (ECSCAS)” based on Polychotomous models of Item Response Theory (IRT) [Volume 6, Issue 2, 2023, Pages 47-53]
-
Power Generating Industry
A Risk Assessment Model for Exploitation of New Technologies [Volume 5, Issue 2, 2022, Pages 117-126]
-
Power Loss
Improving Reliability and Reducing Power Loss in Power Distribution Network by Determining Optimal Location and Size of Capacitor Banks [Volume 1, Issue 1, 2018, Pages 25-33]
-
Power loss reduction
Improving Reliability from View of Buyer-Seller by Optimal Reconfiguration: Applicability to Lorestan Distribution Network [Volume 4, Issue 1, 2021, Pages 1-6]
-
Prediction signal
Clustering of Condition-Based Maintenance Considering Perfect and Imperfect actions [Volume 3, Issue 1, 2020, Pages 69-76]
-
Preventive Maintenance Optimisation
Optimising System Continuity in Preventive Maintenance Schedules Based on Integrated Failure Mode and Spare Part Inventory Modelling [Volume 5, Issue 2, 2022, Pages 19-31]
-
Probabilistic Model
Probabilistic Physics of Failure (PPOF) Reliability Analysis of RF-MEMS Switches under Uncertainty [Volume 1, Issue 1, 2018, Pages 1-10]
-
Probabilistic modeling
Computation of Importance Measures Using Bayesian Networks for the Reliability and Safety of Complex Systems [Volume 3, Issue 2, 2020, Pages 99-111]
-
Production probability
Probability assessment of photoneutron production of Varian-Clinac ix linear accelerator using Monte Carlo simulation [Volume 7, Issue 1, 2024, Pages 37-44]
-
Profit analysis
Stochastic Analysis of Complex System with Auto Changeover Switch and Advert Environment Employing Copula Approach [Volume 3, Issue 1, 2020, Pages 17-26]
-
Profit function
Probabilistic Assessment of Two-Unit Parallel System with Correlated Lifetime under Inspection Using Regenerative Point Technique [Volume 2, Issue 1, 2019, Pages 5-14]
-
Prognosis and health management
Prediction of Failure Time and Remaining Useful Life in Aviation Systems: Predictors, models, and challenges [Volume 4, Issue 2, 2021, Pages 97-106]
-
Progressive censoring scheme
m-Component Reliability Model in Bayesian Inference on Modified Weibull Distribution [Volume 7, Issue 1, 2024, Pages 19-29]
-
PROMETHEE
A Combined AHP-PROMETHEE Approach for Intelligent Risk Prediction of Leak in a Storage Tank [Volume 3, Issue 2, 2020, Pages 55-61]
-
Proportional hazard model
Assessment of Spare Parts Requirement by Reliability: A Case Study [Volume 5, Issue 1, 2022, Pages 9-19]
Q
-
Q-Learning
Optimal Preventive Maintenance Policy for Non-Identical Components: Traditional Renewal Theory vs Modern Reinforcement Learning [Volume 6, Issue 1, 2023, Pages 77-85]
-
Quadrotor UAVs
Integrating Second Order Sliding Mode Control and Anomaly Detection Using Auto-Encoder for Enhanced Safety and Reliability of Quadrotor UAVs [Volume 5, Issue 2, 2022, Pages 107-116]
-
Quality
A Mixed Integer Model for Unrelated Parallel Machine Scheduling with Job Deteriorating Effect [Volume 5, Issue 1, 2022, Pages 77-84]
-
Quality
Identifying & Ranking the Key Factors Affecting the Quality Assurance (QA) of High-Tech Products in Turbine Engineering and Manufacturing Companies [Volume 5, Issue 2, 2022, Pages 79-87]
-
Quality assurance(QA)
Identifying & Ranking the Key Factors Affecting the Quality Assurance (QA) of High-Tech Products in Turbine Engineering and Manufacturing Companies [Volume 5, Issue 2, 2022, Pages 79-87]
-
Quantile function
Direct Quantile Function Estimation Using Information Principles and Its Applications in Reliability Analysis [Volume 5, Issue 2, 2022, Pages 63-77]
R
-
Railway turnout
In Situ Switch Blade Displacement Measurements in A Railway Turnout for Short-Term Monitoring Application [Volume 6, Issue 1, 2023, Pages 19-25]
-
Ranking
Ranking of Factors Affecting Cyber Security [Volume 6, Issue 1, 2023, Pages 63-69]
-
Rayleigh Distribution
Reliability Model of Fuzzy Consecutive k-out-of-n: F System [Volume 2, Issue 1, 2019, Pages 1-4]
-
Rayleigh Distribution
Determination of Optimum Sample Size for Lot Acceptance Attribute Sampling under Life Tests Based On Rayleigh Distribution Using Graphical Evaluation Review Technique (GERT) [Volume 3, Issue 2, 2020, Pages 91-98]
-
Reciprocating Engine
Prediction of Wear Failure in Journalpin Bearings [Volume 5, Issue 1, 2022, Pages 21-27]
-
Recommended Practices
Aviation Safety International Standards in the Framework of National Air Law [Volume 5, Issue 1, 2022, Pages 59-67]
-
Redundancy allocation
Optimal Multi-Level Redundancy Allocation Using a New Modified Bat Algorithm [Volume 5, Issue 2, 2022, Pages 41-48]
-
Reinforced concrete building
Implementation of AI for The Prediction of Failures of Reinforced Concrete Frames [Volume 5, Issue 2, 2022, Pages 1-7]
-
Reinforcement Learning
An overview of reinforcement learning and deep reinforcement learning for condition-based maintenance [Volume 4, Issue 2, 2021, Pages 81-89]
-
Reinforcement Learning
Optimal Preventive Maintenance Policy for Non-Identical Components: Traditional Renewal Theory vs Modern Reinforcement Learning [Volume 6, Issue 1, 2023, Pages 77-85]
-
Reinforcement Learning
Target Interception in Uncertain Environment Using ART2-Based Reinforcement Learning [Volume 6, Issue 2, 2023, Pages 93-105]
-
RELAP5
Investigation of the Natural Circulation FlowMap in NuScale Small Modular Reactor [Volume 4, Issue 1, 2021, Pages 95-100]
-
Release rate
Investigation of Chlorine Gas Emission Hazards at ABFA Chlorination Plant at Abadan Station using Aloha and Marplot Software [Volume 6, Issue 1, 2023, Pages 11-17]
-
Reliability
Triple-Triple Redundant Reliable Onboard Computer Based on Multicore Microcontrollers [Volume 1, Issue 1, 2018, Pages 17-24]
-
Reliability
Reliability Model of Fuzzy Consecutive k-out-of-n: F System [Volume 2, Issue 1, 2019, Pages 1-4]
-
Reliability
Improving Reliability and Reducing Power Loss in Power Distribution Network by Determining Optimal Location and Size of Capacitor Banks [Volume 1, Issue 1, 2018, Pages 25-33]
-
Reliability
Probabilistic Assessment of Two-Unit Parallel System with Correlated Lifetime under Inspection Using Regenerative Point Technique [Volume 2, Issue 1, 2019, Pages 5-14]
-
Reliability
Stochastic Analysis of Complex System with Auto Changeover Switch and Advert Environment Employing Copula Approach [Volume 3, Issue 1, 2020, Pages 17-26]
-
Reliability
Fault Tolerant Nanoscale Structures and Related Delay [Volume 3, Issue 1, 2020, Pages 55-59]
-
Reliability
Development of an Efficient Approach for Reliability Analysis Using the Comparative Study of Several Static and Dynamic Methods; Case Study of an Unmanned Aerial Vehicle [Volume 3, Issue 1, 2020, Pages 45-53]
-
Reliability
Reliability Enhancement of Computer Network System with Server Replication [Volume 3, Issue 1, 2020, Pages 103-112]
-
Reliability
Probabilistic Life Assessment of Gas Turbine Blade Alloys under Creep [Volume 3, Issue 2, 2020, Pages 9-17]
-
Reliability
Computation of Importance Measures Using Bayesian Networks for the Reliability and Safety of Complex Systems [Volume 3, Issue 2, 2020, Pages 99-111]
-
Reliability
Reliability and Sensitivity Analysis of a Batch Arrival Retrial Queue with k-Phase Services, Feedback, Vacation, Delay, Repair and Admission [Volume 3, Issue 2, 2020, Pages 27-40]
-
Reliability
Performance Analysis of Complex Series Parallel Computer Network with Transparent Bridge Using Copula Distribution [Volume 4, Issue 1, 2021, Pages 47-59]
-
Reliability
Identification of Size and Location of Bearing Damage via Deep Learning [Volume 4, Issue 1, 2021, Pages 69-74]
-
Reliability
Improving Reliability of Complex Systems Using Analyses Obtained Through Design Structure Matrix and Interactive Failure Detection Procedures [Volume 4, Issue 1, 2021, Pages 39-45]
-
Reliability
Markov Modeling and Reliability analysis of solar photovoltaic system Using Gumbel Hougaard Family Copula [Volume 4, Issue 2, 2021, Pages 47-58]
-
Reliability
Assessment of Spare Parts Requirement by Reliability: A Case Study [Volume 5, Issue 1, 2022, Pages 9-19]
-
Reliability
Mechanical Equipment Reliability Analysis: Case Study [Volume 4, Issue 2, 2021, Pages 59-70]
-
Reliability
Reliability and Uncertainty Determination of a Combined Heat and Power in Microgrid Systems [Volume 4, Issue 2, 2021, Pages 107-114]
-
Reliability
Failure Mode and Effects Analysis on the Hydraulic System of Aircraft Ilyushin-76 [Volume 5, Issue 1, 2022, Pages 49-58]
-
Reliability
A Mixed Integer Model for Unrelated Parallel Machine Scheduling with Job Deteriorating Effect [Volume 5, Issue 1, 2022, Pages 77-84]
-
Reliability
Reliability Modeling and Performance Evaluation of Sachet Water Production System Using Gumbel- Hougaard Family Copula [Volume 5, Issue 2, 2022, Pages 9-18]
-
Reliability
Copula-Based Approach to Reliability Analysis of Phased-Mission Systems [Volume 5, Issue 2, 2022, Pages 49-62]
-
Reliability
Spherical Fuzzy Geometric Programming: A New Approach for System Reliability Assessment [Volume 6, Issue 1, 2023, Pages 47-53]
-
Reliability
Reliability Evaluation of Reverse Osmosis System in Water Treatment Using Modified Weibull Distribution [Volume 6, Issue 1, 2023, Pages 55-61]
-
Reliability
Optimal Sensors Positioning by Using Value of Information Method [Volume 6, Issue 1, 2023, Pages 87-96]
-
Reliability
Reliability Assessment of Conventional Three-Level Inverters for Use in Hybrid Unmanned Aerial Vehicles [Volume 6, Issue 1, 2023, Pages 97-109]
-
Reliability
Reliability Evaluation of Systems Related to PC-7 Aircrew Using FMEA Method [Volume 6, Issue 2, 2023, Pages 65-75]
-
Reliability
Analysis of Factors Affecting the Safety of C-130 Guidance and Control [Volume 7, Issue 1, 2024, Pages 9-17]
-
Reliability
Reliability evaluation of an industrial system using Lomax-Lindley distribution [(Articles in Press)]
-
Reliability Allocation
Optimal Multi-Level Redundancy Allocation Using a New Modified Bat Algorithm [Volume 5, Issue 2, 2022, Pages 41-48]
-
Reliability analysis method
Step Direction Computation of the First-Order Reliability Analysis Based on Two-Step Root-Finding Methods [Volume 6, Issue 1, 2023, Pages 71-76]
-
Reliability assessment
Analyzing Reliability of CGS Station by Continuous Time Markov Chains (CTMC) [Volume 4, Issue 2, 2021, Pages 91-96]
-
Reliability assessment
Reliability assessment on natural gas pressure reduction stations using Monte Carlo simulation (MCS) [Volume 5, Issue 1, 2022, Pages 29-36]
-
Reliability centered maintenance
In Situ Switch Blade Displacement Measurements in A Railway Turnout for Short-Term Monitoring Application [Volume 6, Issue 1, 2023, Pages 19-25]
-
Reliability-Centered Maintenance
Optimization of Electrical Distribution System Maintenance Process Based on Failure Modes [Volume 2, Issue 1, 2019, Pages 35-42]
-
Reliability engineering
Industry 4.0: Some Challenges and Opportunities for Reliability Engineering [Volume 2, Issue 1, 2019, Pages 23-34]
-
Reliability engineering, Industry 4.0
Stress-Strength Weibull Analysis Applied to Estimate Reliability Index in Industry 4.0 [Volume 4, Issue 2, 2021, Pages 71-80]
-
Reliability Enhancement
Reliability Improvement in Distribution Systems Via Game Theory [Volume 5, Issue 1, 2022, Pages 93-99]
-
Reliability evaluation
Probabilistic Physics of Failure (PPOF) Reliability Analysis of RF-MEMS Switches under Uncertainty [Volume 1, Issue 1, 2018, Pages 1-10]
-
Reliability function
A Study on the Multi-state (r, s)-out-of- n Systems with Dependent Components [Volume 1, Issue 1, 2018, Pages 11-16]
-
Reliability improvement
Improving Reliability from View of Buyer-Seller by Optimal Reconfiguration: Applicability to Lorestan Distribution Network [Volume 4, Issue 1, 2021, Pages 1-6]
-
Reliability index performance levels
Reliability of Iranian Existing Residential Reinforced Concrete Structures in Seismic Events [Volume 6, Issue 2, 2023, Pages 55-64]
-
Reliability life test sampling plan
Determination of Optimum Sample Size for Lot Acceptance Attribute Sampling under Life Tests Based On Rayleigh Distribution Using Graphical Evaluation Review Technique (GERT) [Volume 3, Issue 2, 2020, Pages 91-98]
-
Remaining useful life
Prediction of Failure Time and Remaining Useful Life in Aviation Systems: Predictors, models, and challenges [Volume 4, Issue 2, 2021, Pages 97-106]
-
Repair
Reliability and Sensitivity Analysis of a Batch Arrival Retrial Queue with k-Phase Services, Feedback, Vacation, Delay, Repair and Admission [Volume 3, Issue 2, 2020, Pages 27-40]
-
Repairable
Combined Markov and UGF Methods for Multi-State Repairable Phased Mission Systems [Volume 6, Issue 1, 2023, Pages 1-9]
-
Repair rate
Performance Analysis of K out of N Reverse Osmosis (RO) system in the treatment of wastewater using RAMD analysis [Volume 4, Issue 1, 2021, Pages 85-93]
-
Retrial queue
Reliability and Sensitivity Analysis of a Batch Arrival Retrial Queue with k-Phase Services, Feedback, Vacation, Delay, Repair and Admission [Volume 3, Issue 2, 2020, Pages 27-40]
-
Reverse Osmosis
Reliability Modeling and Performance Evaluation of Sachet Water Production System Using Gumbel- Hougaard Family Copula [Volume 5, Issue 2, 2022, Pages 9-18]
-
Reverse Osmosis
Reliability Evaluation of Reverse Osmosis System in Water Treatment Using Modified Weibull Distribution [Volume 6, Issue 1, 2023, Pages 55-61]
-
RF MEMS capacitive switches
Probabilistic Physics of Failure (PPOF) Reliability Analysis of RF-MEMS Switches under Uncertainty [Volume 1, Issue 1, 2018, Pages 1-10]
-
Risk Assessment
A Risk Assessment Model for Exploitation of New Technologies [Volume 5, Issue 2, 2022, Pages 117-126]
-
Risk Assessment
Review and comparison of different risk assessment methods used for intelligent pigging operations in oil and gas pipelines with emphasis on the Bow Tie method [Volume 7, Issue 1, 2024, Pages 1-8]
-
Risk Assessment Model
COVID-19 Infection Risk Index Estimation in Flight Destinations (case study: Kish Air destinations) [Volume 3, Issue 2, 2020, Pages 63-70]
-
Risk Diagram
Reliability Evaluation of Systems Related to PC-7 Aircrew Using FMEA Method [Volume 6, Issue 2, 2023, Pages 65-75]
-
Risk Management
Introduction of Risk Management Method Based on Hierarchy Risk Management and Surface Data to Eliminate Operational Risk (Second Development) [Volume 6, Issue 2, 2023, Pages 15-20]
-
Risk Management
Maintenance Grouping Optimization with Air Systems to Improve Risk Management [Volume 6, Issue 2, 2023, Pages 85-91]
-
Risk management, Performance
A Comprehensive Review of Safety and Risk Management Strategies in Aerospace Operations for Human Casualty Mitigation [Volume 6, Issue 1, 2023, Pages 111-130]
-
Rotary Machine
Identification of Size and Location of Bearing Damage via Deep Learning [Volume 4, Issue 1, 2021, Pages 69-74]
-
RPN
Failure Mode and Effects Analysis on the Hydraulic System of Aircraft Ilyushin-76 [Volume 5, Issue 1, 2022, Pages 49-58]
-
RPN
Reliability Evaluation of Systems Related to PC-7 Aircrew Using FMEA Method [Volume 6, Issue 2, 2023, Pages 65-75]
S
-
Safety Management
Significance of Aviation Safety, Its Evaluation, and Ways to Strengthen Security [Volume 6, Issue 2, 2023, Pages 37-45]
-
Sampling Method
Improving Accuracy in Importance Sampling: An Integrated Approach with Fuzzy-Strata Sampling [Volume 4, Issue 1, 2021, Pages 61-67]
-
SARS-COV 2 pandemic
Introduction of Risk Management Method Based on Hierarchy Risk Management and Surface Data to Eliminate Operational Risk (Second Development) [Volume 6, Issue 2, 2023, Pages 15-20]
-
SCRI method
Probabilistic Life Assessment of Gas Turbine Blade Alloys under Creep [Volume 3, Issue 2, 2020, Pages 9-17]
-
Second Development
Introduction of Risk Management Method Based on Hierarchy Risk Management and Surface Data to Eliminate Operational Risk (Second Development) [Volume 6, Issue 2, 2023, Pages 15-20]
-
Second-Order Reliability Method
A Continuum Damage Mechanics Approach for Reliability Analysis of Composite Laminates Containing a Central Circular Hole [Volume 4, Issue 1, 2021, Pages 23-30]
-
Security
Origins of Cyber Security: Short Report [Volume 6, Issue 2, 2023, Pages 77-83]
-
Security
Awareness and Social Engineering-Based Cyberattacks [Volume 7, Issue 1, 2024]
-
Seismic risk
A Reliable Method for Determining the Tapered Minimum Magnitude in a Probabilistic Seismic Hazard Analysis [Volume 5, Issue 2, 2022, Pages 89-95]
-
Sensitivity
Performance Analysis of Complex Series Parallel Computer Network with Transparent Bridge Using Copula Distribution [Volume 4, Issue 1, 2021, Pages 47-59]
-
Sensitivity
Markov Modeling and Reliability analysis of solar photovoltaic system Using Gumbel Hougaard Family Copula [Volume 4, Issue 2, 2021, Pages 47-58]
-
Shear strength reduction technique
Determination of stochastic shear strength parameters of a real landslide by back analysis [Volume 4, Issue 1, 2021, Pages 7-16]
-
Simulation Methods
Dynamic Reliability Analysis of Moment Resisting Concrete Frames [Volume 4, Issue 1, 2021, Pages 17-22]
-
Sliding mode control
Fault-tolerant Sliding Mode Controller and Active Vibration Control Design for Attitude Stabilization of a Flexible Spacecraft in the Presence of Bounded Disturbances [Volume 5, Issue 1, 2022, Pages 85-91]
-
Small Modular Reactors
Neutronic and Safety Analysis of CAREM-25 Small Modular Reactor Using Supermc Advanced Code [Volume 6, Issue 2, 2023, Pages 107-113]
-
Social Engineering
Awareness and Social Engineering-Based Cyberattacks [Volume 7, Issue 1, 2024]
-
Social security
Ranking of Factors Affecting Cyber Security [Volume 6, Issue 1, 2023, Pages 63-69]
-
Software Reliability
A Novel Method for Software Reliability Assessment via Neuro-Fuzzy System [Volume 5, Issue 1, 2022, Pages 43-48]
-
Software Reliability Prediction
LSTM Encoder-Decoder Dropout Model in Software Reliability Prediction. [Volume 4, Issue 2, 2021, Pages 1-12]
-
Software safety
Software Safety Analysis with UML-Based SRBD and Fuzzy VIKOR- Based FMEA [Volume 1, Issue 1, 2018, Pages 35-44]
-
Sojourn Times
Probabilistic Assessment of Two-Unit Parallel System with Correlated Lifetime under Inspection Using Regenerative Point Technique [Volume 2, Issue 1, 2019, Pages 5-14]
-
Solutions
Significance of Aviation Safety, Its Evaluation, and Ways to Strengthen Security [Volume 6, Issue 2, 2023, Pages 37-45]
-
Spacecraft
Application of a Model-Based Fault Detection Approach on a Spacecraft [Volume 3, Issue 2, 2020, Pages 19-26]
-
Spare parts inventory
Optimising System Continuity in Preventive Maintenance Schedules Based on Integrated Failure Mode and Spare Part Inventory Modelling [Volume 5, Issue 2, 2022, Pages 19-31]
-
SRBD
Software Safety Analysis with UML-Based SRBD and Fuzzy VIKOR- Based FMEA [Volume 1, Issue 1, 2018, Pages 35-44]
-
Staffing
Ranking of Factors Affecting Cyber Security [Volume 6, Issue 1, 2023, Pages 63-69]
-
Standards
Aviation Safety International Standards in the Framework of National Air Law [Volume 5, Issue 1, 2022, Pages 59-67]
-
State based philosophy
A Reliable Fracture Mechanics [Volume 3, Issue 1, 2020, Pages 1-15]
-
State-dependent admission
Reliability and Sensitivity Analysis of a Batch Arrival Retrial Queue with k-Phase Services, Feedback, Vacation, Delay, Repair and Admission [Volume 3, Issue 2, 2020, Pages 27-40]
-
Step direction
Step Direction Computation of the First-Order Reliability Analysis Based on Two-Step Root-Finding Methods [Volume 6, Issue 1, 2023, Pages 71-76]
-
Stochastic Analysis
Determination of stochastic shear strength parameters of a real landslide by back analysis [Volume 4, Issue 1, 2021, Pages 7-16]
-
Storage tank
Could the Bunce field Catastrophe Have Been Prevented Using an Intelligent Decision-Making System? [Volume 4, Issue 1, 2021, Pages 75-84]
-
Stress intensity factor
A Reliable Fracture Mechanics [Volume 3, Issue 1, 2020, Pages 1-15]
-
Stress-strength analysis
Stress-Strength Weibull Analysis Applied to Estimate Reliability Index in Industry 4.0 [Volume 4, Issue 2, 2021, Pages 71-80]
-
Stress-Strength Weibull
Stress-Strength Weibull Analysis Applied to Estimate Reliability Index in Industry 4.0 [Volume 4, Issue 2, 2021, Pages 71-80]
-
SuperMC
Neutronic and Safety Analysis of CAREM-25 Small Modular Reactor Using Supermc Advanced Code [Volume 6, Issue 2, 2023, Pages 107-113]
-
Supply chain
A Comprehensive Review of Safety and Risk Management Strategies in Aerospace Operations for Human Casualty Mitigation [Volume 6, Issue 1, 2023, Pages 111-130]
-
Support Vector Machine
Detecting Unsafe Conditions of a Lathe using an Artificial Neural Network with Three-axis Acceleration Data [Volume 3, Issue 1, 2020, Pages 27-34]
-
Switch panel
In Situ Switch Blade Displacement Measurements in A Railway Turnout for Short-Term Monitoring Application [Volume 6, Issue 1, 2023, Pages 19-25]
-
System
Reliability Evaluation of Reverse Osmosis System in Water Treatment Using Modified Weibull Distribution [Volume 6, Issue 1, 2023, Pages 55-61]
-
Systems
Reducing Risk and Increasing Reliability and Safety of Compressed Air Systems by Detecting Patterns in Pressure Signals [Volume 3, Issue 2, 2020, Pages 81-89]
T
-
Target Interception
Target Interception in Uncertain Environment Using ART2-Based Reinforcement Learning [Volume 6, Issue 2, 2023, Pages 93-105]
-
Tensile test
Acoustic Emission Characteristics Determination for Online Structural Monitoring of Fatigue Crack Growth inAluminium Alloy 2025 [Volume 5, Issue 1, 2022, Pages 37-42]
-
Thermal sensitivity analysis
Thermal Sensitivity Analysis of a Telemetry Antenna in Sub-Orbital Spaceflights [Volume 4, Issue 2, 2021, Pages 13-19]
-
Toxic Substance
Evaluation of the Possible Hazards of an Ethanol Storage Tank [Volume 4, Issue 1, 2021, Pages 31-38]
-
Triple Modular Redundancy
Triple-Triple Redundant Reliable Onboard Computer Based on Multicore Microcontrollers [Volume 1, Issue 1, 2018, Pages 17-24]
-
Tuned mass
Sensitive Analysis of Tuned Mass on High Cycle Fatigue Safety Factor of Crankshaft [Volume 3, Issue 1, 2020, Pages 61-67]
-
Tuned mass
Parametric Study of Torsional Damper on Crankshaft Life Assessment of an IC Engine [Volume 3, Issue 2, 2020, Pages 41-50]
-
Turbine Manufacturing
Identifying & Ranking the Key Factors Affecting the Quality Assurance (QA) of High-Tech Products in Turbine Engineering and Manufacturing Companies [Volume 5, Issue 2, 2022, Pages 79-87]
-
Two-step root-finding
Step Direction Computation of the First-Order Reliability Analysis Based on Two-Step Root-Finding Methods [Volume 6, Issue 1, 2023, Pages 71-76]
U
-
UAV
Development of an Efficient Approach for Reliability Analysis Using the Comparative Study of Several Static and Dynamic Methods; Case Study of an Unmanned Aerial Vehicle [Volume 3, Issue 1, 2020, Pages 45-53]
-
UGF
Combined Markov and UGF Methods for Multi-State Repairable Phased Mission Systems [Volume 6, Issue 1, 2023, Pages 1-9]
-
UML
Software Safety Analysis with UML-Based SRBD and Fuzzy VIKOR- Based FMEA [Volume 1, Issue 1, 2018, Pages 35-44]
-
Uncertainty
Probabilistic Physics of Failure (PPOF) Reliability Analysis of RF-MEMS Switches under Uncertainty [Volume 1, Issue 1, 2018, Pages 1-10]
-
Uncertainty
Improving Accuracy in Importance Sampling: An Integrated Approach with Fuzzy-Strata Sampling [Volume 4, Issue 1, 2021, Pages 61-67]
-
Uncertainty
Optimal Multi-Level Redundancy Allocation Using a New Modified Bat Algorithm [Volume 5, Issue 2, 2022, Pages 41-48]
-
Under actuation
Fault Tolerant Guidance of Under-Actuated Satellite Formation Flying Using Inter-Vehicle Coulomb Force [Volume 2, Issue 1, 2019, Pages 43-52]
-
Unit
On Possibility of Extending the Optimal Replacement time of Series and Parallel Systems [Volume 4, Issue 2, 2021, Pages 29-37]
-
Unobserved Covariate
Mechanical Equipment Reliability Analysis: Case Study [Volume 4, Issue 2, 2021, Pages 59-70]
V
-
Validity
Analysis of Factors Affecting the Safety of C-130 Guidance and Control [Volume 7, Issue 1, 2024, Pages 9-17]
-
Variability measure
Nonparametric Estimation of the Family of Risk Measures Based on Progressive Type II Censored Data [Volume 5, Issue 1, 2022, Pages 69-75]
-
Varian-Clinac ix
Probability assessment of photoneutron production of Varian-Clinac ix linear accelerator using Monte Carlo simulation [Volume 7, Issue 1, 2024, Pages 37-44]
-
Virtual Space
Origins of Cyber Security: Short Report [Volume 6, Issue 2, 2023, Pages 77-83]
W
-
Water
Reliability Modeling and Performance Evaluation of Sachet Water Production System Using Gumbel- Hougaard Family Copula [Volume 5, Issue 2, 2022, Pages 9-18]
-
Water Transmission Pipelines
Corrosion Reliability Assessment of underground Water Transmission Pipelines by IHS Algorithm [Volume 1, Issue 1, 2018, Pages 45-51]
-
Wavelet
Reducing Risk and Increasing Reliability and Safety of Compressed Air Systems by Detecting Patterns in Pressure Signals [Volume 3, Issue 2, 2020, Pages 81-89]
-
Wear Failure
Prediction of Wear Failure in Journalpin Bearings [Volume 5, Issue 1, 2022, Pages 21-27]
-
Weibull
Reliability Evaluation of Reverse Osmosis System in Water Treatment Using Modified Weibull Distribution [Volume 6, Issue 1, 2023, Pages 55-61]
-
Weibull distribution
Bayesian Inference of Reliability Growth-Oriented Weibull Distribution for Multiple Mechanical Stages Systems [Volume 3, Issue 1, 2020, Pages 77-84]
-
Weibull distribution
Stress-Strength Weibull Analysis Applied to Estimate Reliability Index in Industry 4.0 [Volume 4, Issue 2, 2021, Pages 71-80]
-
Weibull mode
The Conditional Estimation for related Weibull parameters Under Type-II Censoring [Volume 3, Issue 1, 2020, Pages 97-101]
-
Weibull shape parameters
Stress-Strength Weibull Analysis Applied to Estimate Reliability Index in Industry 4.0 [Volume 4, Issue 2, 2021, Pages 71-80]
-
Wheel loaders
Mechanical Equipment Reliability Analysis: Case Study [Volume 4, Issue 2, 2021, Pages 59-70]
-
Wing Flutter
Sensitivity Analysis of Flutter Velocity to Structural Properties of a Composite Wing [Volume 6, Issue 2, 2023, Pages 27-35]
Your query does not match with any item